Ceiling medallions can enhance the beauty of any room’s décor. It is a timeless and classic décor item. It can in fact create wonderful designs. It adds a touch of elegance to the room and makes the room look unique.

So, are you interested to install ceiling medallions in your home? Installing ceiling medallions is one of the easiest things that you can do for changing the feel and look of your room. Here are some top tips that you should consider while installing ceiling medallion.

Firstly, you need to plan out the installation before placing an order. Choose the ceiling medallion that you want to install. If you plan to use it in conjunction with ceiling fan or light fixture, you should note whether the center hole of the ceiling medallion matches up with fixture’s trim or not. If it doesn’t match, then order for another fixture trim ring or ceiling medallion center. Never forget to check the building code.

After planning out the installation, order the materials that are needed. Some of the important things that must be ordered are ceiling medallion, ceiling medallion center, construction adhesive, fasteners, caulk etc. After, you have got all the materials; assemble them near you for installation of the ceiling medallion. Make sure to turn off the electrical power at breaker box. Then, remove the fixture very safely.

Next, concentrate on the layout. If you plan to install a small medallion, hold it with your hand and trace all around it by making use of a pencil. You will require the help of another person if you plan to install a large medallion. Make use of a single mark at junction of medallion/ceiling if you want to install round shaped medallion. Draw centerlines that run parallel to walls if you want to install diamond or oval medallions. Then make marks at a distance of 90 degrees on ceiling medallion perimeter. Mark the ceiling joists on the medallion and on ceiling if you are making use of screws for the purpose of mounting.

After all these things what you need to do is drill and set holes to mount screws. You can also drill the center hole of ceiling medallion if necessary. Then apply the adhesive according to the direction of adhesive manufacturer. Medallions that are small can be installed by using adhesive. However, fasteners or temporary clamps should be used until and unless the adhesive sets.

Next, fasten up the medallion to ceiling by making use of coated screws in predrilled holes. If you cannot screw directly in ceiling joists, then make use of the toggle bolts. The medallions that have a diameter of more than 20 inches need mechanical fastening.

After the adhesive dries up, caulk perimeter if necessary. Use joint compound, no-shrink spackle or plaster for patching up the screw holes. Sand repair or feather edge and do some paint works. Then hang up the fixture. After all these things, just have a look at the unique beauty which you have created.

Bookmark and Share